Charly its a trackpiece for in the station, see the mounting location, so this goes on its side 45 degr counterclockwise.
I still feel a second, full stretch launch is coming through the cuved columns/standings. Beginning at the lift , turning into flying position and launched on the fly across Rookburg into some kind of a top hat and returning into the organised spaghetti mess of track. At least...I hope for that!
BTW those white "funny fins" at the bottom right are the LSM stators Besides Fly/Friction wheels being more common in general as an in-station-drive it would make absolutely no sense having them there in a 90 degree sitting orientation (and not 45 like you mentioned).
Yes sorry my mistake 45 / 90 degrees.BTW those white "funny fins" at the bottom right are the LSM stators Besides Fly/Friction wheels being more common in general as an in-station-drive it would make absolutely no sense having them there in a 90 degree sitting orientation (and not 45 like you mentioned).
The new wall structure is growing fast. Its now pretty much across the entire roof of the concrete building below.
The wall is also quite close now to the steel towers wall along the side of Wuze Town. I imagine they'll be connecting them soon - then the sound barrier will be complete with the exception of the gap between the new wall and Maus au Chocolat.
On the Facebook group Achterbahn Fans Deutschland Christoph Sauer has posted this picture from this morning showing Vekoma track parts on the back of a lorry near Mönchengladbach.
F.L.Y. must start then with a launch out of that cannon into the Rookburgh area. The large curved launch recently seen in pictures is mid way through the layout.
2 launches would be awesome ! I'm so hyped for this!It is most likely that it will get 2 launches!
How will it beat 1124 meters of track, without going very high with a chainlift, or getting a 100+km/h launch?
If it will get a 100 km/h fast launch, you maybe need bigger curves than it now has.
For example, flying dinousaur has a way wider layout than FLY. In this current layout, 100 km/h is maybe too fast. Because you will maybe get too many g's.
So it's possible that uses 2 launches of 70 km/h instead of one of 100km/h. (that is the speed of Flying Dinosaur)
It could be, or the coaster could have 300m of darkrideIt is most likely that it will get 2 launches!
How will it beat 1124 meters of track, without going very high with a chainlift, or getting a 100+km/h launch?
If it will get a 100 km/h fast launch, you maybe need bigger curves than it now has.
For example, flying dinousaur has a way wider layout than FLY. In this current layout, 100 km/h is maybe too fast. Because you will maybe get too many g's.
So it's possible that uses 2 launches of 70 km/h instead of one of 100km/h. (that is the speed of Flying Dinosaur)
Yes the lift and twist into the flying position will be indoors. The launch will then push you out of the building through the cannon/tunnel structure.New trackparts are black so they are ment for inside? So more concrete pouring on the site soon?