metalhead7
Mega Poster
A while ago I had an idea for a spinning coaster whose blueprint was larger vertically than horizontally. The idea was to support the ride between two towers, but I made the mistake of designing the track before the towers and soon enough the whole thing fell apart. I've decided to try it again but this time to create the towers first and then the ride after.
While I was building the towers I realized this might be a good idea for a competition. The idea behind this would be that you can only use the 32 foundation nodes at the base of the towers to support the ride, and everything must be built off of that structure. If any of you are interested in doing this as a competition let me know. If so I will try to round up some judges and try my best to run it similarly to the other comps on this site, if not I will just post construction updates and eventually my finished product here.
This is my rough idea for the two towers. Let me know if you would like to see something different. I will probably begin track work tomorrow.
While I was building the towers I realized this might be a good idea for a competition. The idea behind this would be that you can only use the 32 foundation nodes at the base of the towers to support the ride, and everything must be built off of that structure. If any of you are interested in doing this as a competition let me know. If so I will try to round up some judges and try my best to run it similarly to the other comps on this site, if not I will just post construction updates and eventually my finished product here.
This is my rough idea for the two towers. Let me know if you would like to see something different. I will probably begin track work tomorrow.